Started work on making the transmission mount. I want the mount to be removable so I made up a couple brackets that are welded flush with the frame.

The bracket started with a piece of 3/8” x 2 1/2” flat bar. The bracket is just tacked together for now and I am planning on adding some gussets. I want to leave room for the exhaust pipes to run down beside the frame rails.

I also added a 3” x 3” tube that connects the outer frame rail to the transmission bracket location. This should help with stiffing up the frame a bit

. I put the fame on a scale today and it weighs in at 260 pounds.